Software release:   2.3.450    dated June 08.  2007

To download this release, right click on the "Version xxx" above and choose "Save as" to download it onto your computer 

Pour télécharger cette nouvelle version de software, click droit avec la souris sur le lien " Version XXX" ci-dessus et choisissez "Sauvegardé sous"

Software release:   2.4.018    dated  March 06.  2008

To download this release, right click on the "Version xxx" above and choose "Save as" to download it onto your computer

Pour télécharger cette nouvelle version de software, click droit avec la souris sur le lien " Version XXX" ci-dessus et choisissez "Sauvegardé sous"
IMPORTANT NOTICE:
The new MINIR82 Firmware offers the TimeCode Output. This features is possible only if your MINIR82 has the latest hardware revision with:  internal PIC rev.2.7 and CPLD revision 2.0
Please check your current version at:  SETUP\MISC\SYSTEM INFO
If you have an earlier versions of the PIC and CPLD then the T.C. output can not be activated ! 
To up-date you MINIR82 to the latest  version it must be returned to the manufacturer, Please contact your nearest distributor.
  
To activate the Time Code Output, go to: SETUP\TIMECODE SETTING\TC SOURCE  and then select "INTERNAL OUTPUT". Then! do not forget to select the appropriate TC Format 

INFORMATION IMPORTANTE:
La nouvelle version du Firmware pour le MINIR82 offre la fonction "TimeCode Output". Cette nouvelle fonctionnalité n'est possible que si votre MINIR82 a la dernière révision hardware et les firmware interne: PIC Révision 2.7 et CPLD  révision 2.0
Veuillez contrôler la version actuelle à:  SETUP\MISC\SYSTEM INFO 
Si vous avez une version antérieure du PIC et de la CPLD, la fonction "T.C. Out ne fonctionnera pas. La mise à jour peut être effectuée que chez le fabricant, veuillez s.v.p. contacter votre distributeur.

Pour activer la fonction T.C. Out, allez à : SETUP\TIMECODE SETTING\TC SOURCE  et sélectionnez "INTERNAL OUTPUT". Ensuite n'oubliez pas de sélectionner le format de TC souhaité


Know issues:  concerns both the MINIR82 and SX-ST Internal Recorder

- When using a CF Card the maximum numbers of takes within the same SCENE folder is limited to 125 TAKES. Exceeding this numbers will lead to unpredictable results.
shall you reach this limit, please create a new SCENE ( creating a new scene does create a new folder automatically )

Note: this concerns only the CF Card, there is no such limitation on the HD

- The "Creation Date & Time" that can be viewed under Windows Explorer or on the MacOS Finder is not correct: this concerns the "Minutes" only, Hours and Second are correct.

Note: the Creation Date refers to the begining of the TAKE and the Modification Date refer to the End of the TAKE
Know issues:  the  SX-ST Internal Recorder only

when removing the CF Card from its slot "Hot", the system consider that the CF Card still inserted which may lead to error message and malfunctions.
Two solu  tions are possibles:
- either turn OFF the Mixer and reboot ( the safest way)
- or manually un-assign the CF Card in the Routing Matrix. Be carefull, the takes on CF Card still posted in the "Last Takes" menu: Please do not try to play these Takes if the CF Card was removed

 

Bug Reports:

SONOSAX continously works on software features and improvements and does its best to supply the best and reliable products . Shall you find a bug or an issue when using your MINIR82 or the SX_ST / SX-VT internal Recorder so please contact us at your earliest convenience :
by phone: +41 - 21 - 651 0101  or by e-mail: sonosax@sonosax.ch