|
|
SONOSAX FD-A100
|
|
 |
- The most compact professional power amplifier
|
|
- Two inputs per channel, with built-in limiters
|
|
|
|
|
|
|
| |
|
|
| SONOSAX FD-A100 is the most compact professional stereo amplifier created to date. This unit has 2 inputs per channel, namely 1 floating balanced input with an XLR connector and one unbalanced input with a cinch connector. In this manner, this monitoring amplifier can be connected with any source and has the advantage of being extremely practical and flexible. The output connectors take cables up to a section of 10mm2 and offer optimal contact. A limiter, which can be disconnected, wards off any deterioration of loudspeakers by clipping.
As regards the electronics of SONOSAX FD-A100, only transistors are used for sound processing, to ensure the absence of coloration, harmonic and transient distortion. All components are of professional type, as for all SONOSAX products, such as conductive plastic potentiometers, hermetic switches with gold-plated contacts, gold-plated connectors, to ensure a long life.
Despite its small size, FD-A100 compares favourably with the best amplifiers on the market, for quality of sound.
|
| |
|
|
|
| |
|
|
| SONOSAX FD-A100 est l'amplificateur stéréo professionnel le plus compact réalisé à ce jour. Cet appareil possède deux entrées par canal, soit une entrée symétrique flottante sur connecteur XLR, et une entrée asymétrique sur connecteur cinch. Ceci permet de relier FD-A100 à n'importe quelle source, et en fait un appareil de contrôle très universel. Les connecteurs de sorties acceptent des câbles jusqu'à une section de 10mm2 et offrent un contact optimal. Un limiteur déconnectable prévient toute détérioration des haut-parleurs par clipping.nt>utateurs hermétiques à contacts dorés, connecteurs également dorés, afin d'assurer une très longue durée de vie.
Malgré son très faible volume, FD-A100 supporte la comparaison d'écoute avec les meilleurs appareils existants.
|
| |
|
|
|
| |
|
|
| SONOSAX FD-A100 ist der kompakteste professionelle Stereo-Verstärker, der je gebaut wurde. Dieses Gerät hat zwei Eingänge pro Kanal, einen erdfrei-symetrischen mit XLR-Buchse und einen anderen asymetrischen mit Cinch-Buchsen. Auf diese Weise kann dieser Verstärker mit jeder beliebigen Quelle verbunden werden und ist somit vielseitig und praktisch. Die Ausgangsverbindungen tolerieren Kabel bis zu 10mm2 Querschnitt und gewährleisten einen optimalen Kontakt. Ein abstellbarer Begrenzer bewahrt die Lautsprecher vor Ubersteuerungen.
Die Elektronik des SONOSAX FD-A100 benützt ausschliesslich Transistoren für die Tonbearbeitung, um Verfärbungen und harmonische wie auch transiente Verzerrungen zu vermeiden. Um eine möglichst lange Lebensdauer zu garantieren, entsprechen sämtliche Bauteile professionellen Standards wie bei allen SONOSAX-Produkten, seien das die Leitplastik-Potentiometer, die hermetische gekapselten Schalter mit Goldkontakten oder die vergoldeten Steckverbindungen.
Trotz seiner kompakten Bauweise ist FD-A100 qualitativ vergleichbar mit anderen Verstärkern der Spitzenklasse.
|
| |
|
|
|
FRONT PANEL  |
REAR PANEL  |
|
|
| BALANCED INPUTS |
|
|
| Type |
: |
balanced transformerless, XLR connectors |
| Impedance |
: |
5kOhms, 20Hz to 20kHz |
| Nominal input level |
: |
0dBu (0,775V RMS) |
|
|
| UNBALANCED INPUTS |
|
|
| Type |
: |
unbalanced, cinch connectors |
| Impedance |
: |
10kOhms, 20Hz to 20kHz |
| Nominal input level |
: |
0dBu (0,775V RMS) |
|
|
| SUMMARY OF CHARACTERISTICS |
|
|
| Gain |
: |
25dB |
| Output power |
: |
2x38 Watts 8 Ohms, 2x60 Watts 4 Ohms, 2x85 Watts 2 Ohms |
| Output power on bridged mode |
: |
100 Watts 8 Ohms, 120 Watts 4 Ohms (see manual) |
| Frequency response |
: |
±0,02dB, 10Hz to 20kHz, -3dB at 4Hz and 500kHz |
| Slew rate |
: |
better than 35V/microsecond |
| Damping factor |
: |
better than 2000 |
| Crosstalk |
: |
better than 80dB, 20Hz to 20kHz |
| THD |
: |
less than 0.02%, 20Hz to 20kHz at maximum power |
| Signal to noise ratio |
: |
better than 115dB, 22Hz to 22kHz |
| Limiter |
: |
threshold 2dB before clipping level |
| Overload indicator |
: |
threshold 3dB before clipping level |
|
|
| POWER AND DIMENSIONS |
|
|
| Input |
: |
selectable 100, 120, 220 and 240V AC, 44 to 66Hz |
| Dimensions |
: |
13,4" x 5,7" x 2,85" (340 x 144 x 72mm), 10lbs (4,5Kg) |
|
|
| Improvements may cause change of features and specifications without notice. |
|
|
Updated November 26, 2000 ly
|
|
|